Step by step to crack wifi password by beini Feeding Bottle

1. Insert CD to you CD Rom, restart your computer and boot the CD Rom (just like when you format computer to install windows, boot the CD).
    You may need to change your boot order to CDROM first instead of Harddisk. It normally change change in bios setup during you start computer by press F2, F10, ESC  depending your computer.
    ** If you don't know how to do this, kindly consult your friend/computer technician with basic computer knowledge.
         Or go to www.google.com and search for how to "boot from CD ROM drive".

2. After boot successful, you will be bring to below screen. Click the "Feeding Bottle" to start the program.
    A windows will prompt out, just click ok.

   

   

2. At below screen, select the wifi card and wait for the monitoring mode enabled. Then click next..

  

3. Click scan and wait for 30second. Then select the wifi that have client as shown in below.
    Click and highlight the client info and click next.

   


4. Click start to attack, you will notice the IVS start running.. Once it reach 30000 to 50000, the password should be found. Refer below picture.
   
  

    Note: the router that you want to hack must be using (have data transfer), the higher data transfer, the faster the cracking process.
    If you notice that IVS value is not running, or running very very slow after few minutes, it means that there is no data transfer on the router. You may look for other time (when the router is using) to test  
    again.


5. Below shown successful case with password shown. Copy down the password and close the software. Then logout and shutdown the machine.

   

*** This Beini Software is for your own wifi education purpose.
       Cracking other people wifi is illegal and against law.
       We advice you do not attempt to attack other ppl wireless other than your own.

Thanks.

credit to